[1] N. Ashgriz, Handbook of atomization and sprays: theory and applications, Springer Science & Business Media, 2011.
[2] E. Babinsky, P. Sojka, Modeling drop size distributions, Progress in energy and combustion science, Vol. 28, pp. 303-329, 2002.
[3] Z. Han, S. Parrish, P. V. Farrell, R. D. Reitz, Modeling atomization processes of pressure-swirl hollow-cone fuel sprays, Atomization and Sprays, Vol. 7, 1997.
[4] N. Dombrowski, W. Johns, The aerodynamic instability and disintegration of viscous liquid sheets, Chemical Engineering Science, Vol. 18, pp. 203-214, 1963.
[5] X. Li, R. Tankin, On the temporal instability of a two-dimensional viscous liquid sheet, Journal of Fluid Mechanics, Vol. 226, pp. 425-443, 1991.
[6] P. Senecal, D. P. Schmidt, I. Nouar, C. J. Rutland, R. D. Reitz, M. Corradini, Modeling high-speed viscous liquid sheet atomization, International Journal of Multiphase Flow, Vol. 25, pp. 1073-1097, 1999.
[7] D. P. Schmidt, I. Nouar, P. Senecal, C. Rutland, J. Martin, R. D. Reitz, et al., Pressure-swirl atomization in the near field, SAE transactions, Vol. 108, pp. 471-484, 1999.
[8] S. E. Parrish, Spray Characterization in a Motored Direct-Injection Spark-Ignited Engine, Ph.D. Thesis, The University of Wisconsin-Madison, 1997.
[9] Y. -S. Shim, G. -M. Choi, D. -J. Kim, Numerical and experimental study on hollow-cone fuel spray of highpressure swirl injector under high ambient pressure condition, Journal of Mechanical Science and Technology, Vol. 22, pp. 320-329, 2008.
[10] S. H. Bafekr, M. Shams, R. Ebrahimi, A. Shadaram, Numerical simulation of pressure-swirl spray dispersion by using eulerian-lagrangian Method, Journal of Dispersion Science and Technology, Vol. 32, pp. 47-55, 2010.
[11] I. Elbadawy, P. H. Gaskell, M. Lawes, H. M. Thompson, Numerical investigation of the effect of ambient turbulence on pressure swirl spray characteristics, International Journal of Multiphase Flow, Vol. 77, pp. 271-284, 2015.
[12] J. -W. Ding, G. -X. Li, Y. -S. Yu, H. -M. Li, Numerical Investigation on Primary Atomization Mechanism of Hollow Cone Swirling Sprays, International Journal of Rotating Machinery, Vol. 2016.
[13] M. Naghizadeh, A. Ghahremani, M. H. Saidi, Numerical simulation of spray characteristics of bio-ethanol and its blend with gasoline in a direct injection combustion chamber, Modares Mechanical Engineering, Vol. 15, pp. 112-122, 2015.
[14] M. Janmohammadi, A. Kebriaei, M. Farshchi, Numerical simulation of folw field inside and outside the pressure swirl injectors, in 14th International Conference of Iranian Aerospace Society, Tehran, 2014.
[15] M. Soltani, K. Ghorbanian, M. Ashjaee, M. Morad, Spray characteristics of a liquid–liquid coaxial swirl atomizer at different mass flow rates, Aerospace science and technology, Vol. 9, pp. 592-604, 2005.
[16] C. D. Radke, Experimental characterization of a liquid-liquid co-axial swirl rocket injector using non-invasive optical and X-ray techniques, 2012.
[17] M. Rashad, H. Yong, Z. Zekun, Effect of geometric parameters on spray characteristics of pressure swirl atomizers, International Journal of Hydrogen Energy, Vol. 41, No. 35, pp. 15790-15799, 2016.
[18] Z. Zhang, Q. Chen, Comparison of the Eulerian and Lagrangian methods for predicting particle transport in enclosed spaces, Atmospheric Environment, Vol. 41, pp. 5236-5248, 2007.
[19] M. Fogliati, D. Fontana, M. Garbero, M. Vanni, G. Baldi, R. Donde, CFD simulation of paint deposition in an air spray process, JCT research, Vol. 3, pp. 117-125, 2006.
[20] T. -H. Shih, W. Liou, A. Shabbir, Z. Yang, J. Zhu, A new k-epsilon eddy viscosity model for high Reynolds number turbulent flows: Model development and validation, 1994.
[21] F. Peng, S. K. Aggarwal, A review of droplet dynamics and vaporization modeling for engineering calculations, in ASME 1994 International Gas Turbine and Aeroengine Congress and Exposition, pp. V003T06A003-V003T06A003.
[22] F. P. Kärrholm, Numerical modelling of diesel spray injection, turbulence interaction and combustion: Chalmers University of Technology, 2008.
[23] T. Inamura, H. Tamura, H. Sakamoto, Characteristics of liquid film and spray injected from swirl coaxial injector, Journal of propulsion and Power, Vol. 19, pp. 632-639, 2003.
[24] J. Kennedy, High Weber number SMD correlations for pressure atomizers, Journal of engineering for gas turbines and power, Vol. 108, pp. 191-195, 1986.
[25] W. Hagerty, J. Shea, A study of the stability of plane fluid sheets, J. Appl. Mech, Vol. 22, pp. 509-514, 1955.
[26] N. Dombrowski, P. Hooper, The effect of ambient density on drop formation in sprays, Chemical Engineering Science, Vol. 17, pp. 291-305, 1962.
[27] T. Maric, J. Hopken, K. Mooney, The OpenFOAM technology primer, 2014.