@article { author = {Imani, Kazem and Mokhtari, M. Abolfazl}, title = {Defective tolerance control design for four-blade system in order to tolerate operational defects}, journal = {Aerospace Knowledge and Technology Journal}, volume = {11}, number = {1}, pages = {25-40}, year = {2022}, publisher = {Malek ashtar University of Technology}, issn = {2322-1070}, eissn = {2645-3622}, doi = {}, abstract = {A fault tolerant control is designed for a four-legged bird. This control consists of two parts: status control and position control. Position control is performed by a fuzzy controller and position control is performed by a PD controller. In the next step, the parity space method is implemented in order to diagnose and estimate the defect. In addition to finding the analytical relationship of the defect, in this article, position control will also be performed. Operator saturation and its effects on system performance is another issue not seen in reviewed articles. In this paper, operator saturation is considered and consequently the maximum fault tolerable by the system will be estimated. Using fault signals, control redesign operations have been performed to tolerate faults and correct control inputs; So using the PID controller, the annoying outputs created by the fault are zeroed. The defect is assumed to be of the operative type and two scenarios have been assumed for its occurrence.}, keywords = {Fault tolerant control,parity relation,re – design,fault detection,fault estimation}, title_fa = {طراحی کنترل تحمل‌پذیر عیب برای سیستم چهار پره به‌منظور تحمل عیب‌های عملگری}, abstract_fa = {یک کنترل تحمل‌پذیر عیب برای یک پرنده چهارملخ طراحی شده است. کنترل مزبور شامل دو بخش کنترل وضعیت و کنترل موقعیت می‌باشد. کنترل وضعیت توسط یک کنترل کننده فازی انجام و کنترل موقعیت توسط یک کنترل کننده PD انجام می‌شود. در مرحله بعد روش فضای پریتی به‌منظور تشخیص و تخمین عیب پیاده‌سازی شده است. علاوه بر پیدا کردن رابطه‌ی تحلیلی عیب، در این مقاله کنترل موقعیت نیز انجام خواهد شد. اشباع عملگر و اثرات آن بر عملکرد سیستم یکی دیگر از مواردی است که در مقالات مرور شده دیده نمی‌شود. در این مقاله اشباع عملگر لحاظ شده و به تبع آن بیشینه عیب قابل تحمل توسط سیستم برآورد خواهد شد. با استفاده از سیگنال‌های عیب، عملیات باز-طراحی کنترل به‌منظور تحمل عیب و اصلاح ورودی‌های کنترلی انجام شده است؛ پس با استفاده از کنترل‌کننده PID خروجی‌های مزاحم ایجاد شده توسط عیب صفر شده‌اند. عیب فرض شده از نوع عملگری بوده و دو سناریو برای وقوع آن فرض شده است.}, keywords_fa = {کنترل تحمل‌پذیر عیب,فضای پریتی,باز – طراحی,شناسایی عیب,تخمین عیب}, url = {https://www.astjournal.ir/article_254736.html}, eprint = {https://www.astjournal.ir/article_254736_876a18036130951c2df70c3450e4a468.pdf} }