@article { author = {Sam Daliri, Omid and Vatani, Azadeh and Bozorgmehr, Ali}, title = {Investigation of the strain sensing sensitivity of the CNT-epoxy nanocomposite via changes in electrical resistance}, journal = {Aerospace Knowledge and Technology Journal}, volume = {8}, number = {1}, pages = {73-81}, year = {2019}, publisher = {Malek ashtar University of Technology}, issn = {2322-1070}, eissn = {2645-3622}, doi = {}, abstract = {Multi-wall carbon nanotubes (MWCNTs) which are mixed in polymer materials could be used as a piezoresistive strain sensor for the purpose of structural health monitoring in engineering structures. In this paper, stain sensing sensitivity of CNT-epoxy nanocomposite is presented with changes in electrical resistance. Nanocomposite sensor is sticked on the aluminum cantilever beam to apply strain on it. Initially, MWCNTs with varying content from 0.01 wt% to 1.5 wt% were uniformly dispersed in the epoxy matrix. Dispersion process was conducted with shear mixing device. Therefore, a smart material was created, which was suitable for strain sensing. The microstructure of the sensor was evaluated using scanning electron microscopy to characterize typical distribution of the MWCNTs inside the epoxy matrix and form conductive networks. The effect of the preparation method (type of initial mixing, curing temperature and MWCNTs weight percent) studied on the strain and electrical changes during mechanical loading. The results showed that, initial mixing of epoxy and hardener resulted in higher sensitivity of electrical changes. Also, nanocomposite was more sensitive to strains in cantilever beam when filler content of nanocomposite was closed to the percolation threshold. In addition, sample preparation at various temperatures of 80 and 100 oc showed that the samples in lower curing temperature were more sensitive to the applied strain.}, keywords = {carbon nanotubes (CNT),Nanocomposite,electrical resistance changes,sensor}, title_fa = {بررسی حساسیت نانومادة مرکب نانولولة کربنی - اپوکسی در کرنش‌سنجی با استفاده از تغییرات مقاومت الکتریکی}, abstract_fa = {نانولوله‌های کربنی چندجداره، که در مواد پلیمری به‌کار می‌روند، با هدف ایجاد حسگر پیزو مقاومتی در پایش سلامت سازه‌های مهندسی استفاده می‌شوند. در این مقاله، حساسیت به تغییرات کرنش در نانومادة مرکب حاوی نانولوله کربنی - اپوکسی با استفاده از تغییرات الکتریکی بررسی شد. حسگر نانومادة مرکب روی یک تیر آلومنیمی یک‌سر گیردار چسبانده شده است تا اعمال کرنش روی آن ممکن باشد. ابتدا نانولوله‌های کربنی چندجداره با درصد‌های مختلف وزنی از 0/01 تا 1/5، درون زمینة اپوکسی به‌صورت نسبتاً یکنواخت توزیع شدند. این فرایند توسط یک همزن مکانیکی انجام شد. بدین‌ترتیب ماده‌ای هوشمند و مناسب برای سنجش کرنش ایجاد گردید. با استفاده از میکروسکوپ الکترونی ریزساختار این حسگر بررسی شد تا نحوة توزیع نانولوله‌های کربنی درون زمینة اپوکسی و تشکیل شبکة رسانا مشخص شود. اثر فرایند آماده‌سازی نانومادة مرکب بر تغییرات الکتریکی و کرنش، طی بارگذاری مکانیکی بررسی شد. نتایج نشان داد که اختلاط اولیة اپوکسی و سخت‌کننده منجر به حساسیت بیشتر حسگر نسبت به تغییرات الکتریکی شده است. همچنین آماده‌سازی نمونه‌ها با دو دمای پخت 80 و 100 درجة سانتی‌گراد نشان داد که نمونه‌های ساخته‌شده با دمای پخت پایین‌تر، حساسیت بیشتری نسبت به کرنش اعمال شده دارند.}, keywords_fa = {نانولوله‌های کربنی,نانومادة مرکب,تغییرات مقاومت الکتریکی,حسگر}, url = {https://www.astjournal.ir/article_33895.html}, eprint = {https://www.astjournal.ir/article_33895_707be7cfeba44a57298f677d27e34908.pdf} }