@article { author = {Mohamadipoor, Reza and Zamani, Ehsan and Pol, Mohammad Hossein}, title = {Analytical investigation of energy absorption and damage in the composite plates reinforced with nanoparticles under high velocity impact}, journal = {Aerospace Knowledge and Technology Journal}, volume = {7}, number = {2}, pages = {35-50}, year = {2018}, publisher = {Malek ashtar University of Technology}, issn = {2322-1070}, eissn = {2645-3622}, doi = {}, abstract = {In this paper, the energy absorption and delamination damage in thin composite plates reinforced with nanoparticles under ballistic impact are investigated analytically. During perforation process in the nanocomposite plates considered different regions such as: fracture region, elastic deformation region, delamination region. Mechanical properties like tensile modulus, fracture strain, shear modulus, strain energy release rate specification of projectile and target were used as input to the analytical model. Then, by using of analytical relations and input data are achieved the deflection, strains and tensions around the impact point of the target. Also the amount of energy absorbed by different failure modes and the kinetic energy variation of projectile and target at small time intervals, the radius and energy of the delamination and residual velocity of the projectile is estimated. Finally, the results of analytical models on the nanocomposite plates compared with experimental results under ballistic impact and a good agreement was found. According to the results obtained the effect of nanoparticles on the improved mechanical properties of composite materials and also investigation of various failure modes is discussed.}, keywords = {High velocity impact,Nanocomposite,energy absorption,delamination damage}, title_fa = {بررسی تحلیلی جذب انرژی و آسیب لایه‌لایه‌شدگی در صفحات کامپوزیتی تقویت‌شده با نانوذرات تحت برخورد سرعت بالا}, abstract_fa = {در این مقاله به بررسی تحلیلی جذب انرژی و آسیب لایه‌لایه‌شدگی در صفحات نازک کامپوزیتی تقویت‌شده با نانوذرات تحت برخورد با سرعت بالا پرداخته شده است. مناطق مختلفی طی فرایند برخورد در صفحات نانوکامپوزیت در نظر گرفته ­شده که عبارت‌اند از ناحیة شکست، ناحیة تغییر شکل غیرخطی، ناحیة بدون تغییر شکل و ناحیة لایه‌لایه‌شدن. خواص مکانیکی مانند مدول کششی، کرنش شکست، مدول برشی، چقرمگی شکست و نیز مشخصات هندسی پرتابه و هدف به‌عنوان ورودی به مدل تحلیلی داده شده است. در ادامه، به‌کمک روابط تحلیلی و داده­های ورودی­ خیز، کرنش­ها و تنش­های اطراف محل برخورد در هدف به‌دست آمده است. همچنین میزان انرژی­های جذب‌شده در حالت­های مختلف شکست و تغییرات انرژی جنبشی پرتابه و هدف در بازه­های زمانی کوچک، شعاع ناحیة آسیب و انرژی لایه‌لایه‌شدگی و سرعت خروجی پرتابه تخمین زده شده است. در نهایت نتایج حاصل از مدل تحلیلی با نتایج تجربی برخورد با سرعت بالا روی صفحات نانوکامپوزیت مقایسه و تطابق خوبی مشاهده شده است. در انتها با توجه به نتایج به‌دست آمده اثر نانوذرات در بهبود خواص مکانیکی مواد کامپوزیت و بررسی مودهای مختلف شکست مورد بحث قرار گرفته است.}, keywords_fa = {برخورد با سرعت بالا,نانوکامپوزیت,جذب انرژی,آسیب لایه‌لایه‌شدگی}, url = {https://www.astjournal.ir/article_33719.html}, eprint = {https://www.astjournal.ir/article_33719_368cc17eb6dd838e7076e8678cd99bd5.pdf} }