@article { author = {Yousefi, Sahram and Shahriari, Behrooz and Sadeghinezhad, Mohammad soheil}, title = {Elastic analysis of the rotating FGM spool drum of the axial compressor in aero gas turbine engine}, journal = {Aerospace Knowledge and Technology Journal}, volume = {8}, number = {2}, pages = {55-66}, year = {2020}, publisher = {Malek ashtar University of Technology}, issn = {2322-1070}, eissn = {2645-3622}, doi = {}, abstract = {In this paper, an exact analysis of an axial compressor’s spool of a gas turbine engine has been presented to calculate stresses, strains and displacements. Spool analysis is investigated for both homogeneous and functionally graded material (FGM) states and spool is subjected to centrifugal force and uniform radial loadings at internal and external surfaces. In FGM state, material properties including Young's modulus and density considered variable along the radius direction. Because the Poisson’s ratio variation ranges are insignificant, it considered constant for all states. Stresses, strains and displacements for both homogeneous and FGM with different non-homogeneous coefficients has been calculated. The results shown that using FGM material with suitable non-Homogeneous coefficient can lead to significant improvement in spool’s safety factor and reduction of displacements, strains and stresses in comparison with homogeneous state. On the other hand, using inappropriate FGM coefficients can lead to safety factor reduction and even structure failure. For particular investigated spool, calculated stresses in FGM with negative coefficients are less than homogeneous state and can cause failure in spool, while improvement in safety factor and displacements reduction observed using FGM with positive coefficients in comparison with homogeneous state.}, keywords = {Aero gas turbine engine,Axial compressor,rotating spool drum,FGM,Elastic analysis}, title_fa = {تحلیل الاستیک درام اسپول دوار FGM کمپرسور محوری در موتور توربین گاز هوایی}, abstract_fa = {در این پژوهش حل تحلیلی دقیقی برای درام اسپول کمپرسور محوری یک موتور توربین گاز جهت محاسبه تنش‌ها، کرنش‌ها و جابجایی‌ها انجام شده است. تحلیل انجام شده در دو حالت مختلف یکی درام از جنس همگن و دیگری ماده هدفمند (FGM) تحت نیروی گریز از مرکز ناشی از دوران و بارگذاری یکنواخت شعاعی در سطوح داخلی و خارجی انجام گرفته است. در حالت FGM خواص ماده شامل مدول یانگ و چگالی در راستای شعاع اسپول متغیر هستند. تنش‌ها و جابجایی‌های حاصل برای ماده همگن و ماده FGM با ضرایب غیرهمگن مختلف محاسبه شده است. نتایج نشان می‌دهند استفاده از ماده‌ FGM با ضریب مناسب نسبت به همگن، می‌تواند منجر به بهبود قابل توجه ضریب اطمینان و کاهش جابجایی­ها، کرنش‌ها و تنش‌های اسپول مدنظر گردد. از سوی دیگر انتخاب ضریب  FGM نامناسب می‌تواند باعث کاهش ضریب اطمینان و حتی شکست در سازه گردد. برای اسپول خاص بررسی شده، تنش‌های ایجاد شده در اسپول FGM برای حالتی که ضرایب غیرهمگن منفی در نظر گرفته شده است، کمتر از حالت همگن بوده و باعث شکست سازه می‌شود، در حالی‌که ضریب اطمینان هنگام استفاده از ضرایب مثبت نسبت به حالت همگن بهبود و جابجایی‌ها کاهش یافته است.}, keywords_fa = {موتور توربین گاز هوایی,کمپرسور محوری,درام اسپول دوار,ماده FGM,تحلیل الاستیک}, url = {https://www.astjournal.ir/article_38496.html}, eprint = {https://www.astjournal.ir/article_38496_0c8f98c5e9590bbb9e60d7bf027ae630.pdf} }