Aerospace Knowledge and Technology Journal

Aerospace Knowledge and Technology Journal

Aerospace Knowledge and Technology Journal

Journal Archive

Most Visited Articles
The effect of loss parameters using tandem blade in axial compressor
Investigation of Fin Span Effect on Performance of Missile on its Aerodynamics Analysis
Fracture parameter determination for a thin walled pressurized cylinder under the influence of residual stress induced by welding process
Experimental study and Optimization of Manufacturing Parameters of High Silica-Phenolic/Glass-Epoxy Laminate insulators in order to achieve the Highest thermal resistance and inter-laminar Strength
Integrated guidance and control of the surface-to-air homing missile Pitch channel using optimal neural network
Design of a Navigation System for an Unmanned Air Vehicle Equipped with a Bearing-Only Sensor
Computational Investigation of Mach number and angle of Attack Effects on the Flow Pattern over a 60º Delta Wing
Chirality Effects on Mechanical Properties of Single-Walled Carbon Nanotubes
Current Issue: Volume 15, Issue 1, September 2026 

Dynamic analysis of a rotor-disk system with unbalance and internal damping on a viscoelastic foundation

Pages 53-68

Mahmood Raeiszadeh Kooshkghazi, Majid Bakhtiari, Kamran Daneshjou, Ali Tarkashvand

A new and fast stationary transfer alignment method of strapdown inertial navigation system

Pages 179-198

Mahdi Massoumin, Seyyed Kamal Hosseini Sani, Gholamreza Mohammaddadi

Keywords Cloud

  • Optimization
  • numerical simulation
  • satellite
  • UAV
  • flow control
  • Uncertainty
  • Multi-objective optimization
  • Modeling
  • genetic algorithm
  • Sensitivity analysis
  • Piezoelectric
  • Heat Transfer
  • optimal control
  • Missile
  • Attitude control
  • Simulation
  • Inertial navigation
  • thrust
  • modal analysis
  • Numerical method
  • Computational fluid dynamics
  • fault detection
  • finite element method
  • Nanocomposite
  • quadrotor
  • supersonic flow
  • Control
  • oscillating airfoil
  • three-body problem
  • Neural network
  • FEM
  • flight simulator
  • Aerodynamic coefficients
  • launch vehicle
  • integrated guidance and control
  • Cavitation
  • Performance
  • Combustion chamber
  • energy absorption
  • Carbon Nanotube
  • delta wing
  • Trajectory Tracking
  • Calibration
  • liquid fuel
  • Finite element
  • Thermal management
  • supercritical airfoil
  • Axial turbine
  • multidisciplinary design optimization
  • Conceptual design
  • temperature gradient
  • Transverse Injection
  • fault estimation
  • Free vibration
  • Combustion Efficiency
  • Rudder
  • Target Tracking
  • Sound transmission loss
  • parity relation
  • Film cooling
  • Humidity
  • semi elliptical crack
  • propulsion
  • Heat Pipe
  • reaction wheel
  • Adaptive control
  • Kerosene
  • CFD
  • Cooling
  • Composite
  • Pareto Front
  • UAV security
  • Fouling
  • PCM
  • Constrained optimization
  • cavity
  • Artificial neural network
  • Wind Tunnel
  • unmanned aerial vehicle
  • free convection
  • flow visualization
  • Corona Plasma Actuator
  • PID Controller
  • Unsteady turbulent flow
  • nanofluid
  • Magnetic field
  • central crack
  • Axial compressor
  • inverse dynamics
  • Porous materials
  • Insulation
  • Reinforcement Learning
  • flying wing
  • Diesel
  • Groove
  • statistical analysis
  • stewart platform
  • turbojet engine
  • hazard rate behavior
  • Machine Learning
  • trajectory optimization
  • total pressure loss
  • Bending test
  • Active Vibration Control
  • Attitude Determination
  • Robust control
  • Spray Characteristics
  • transient
  • liquid propellant engine
  • Feedback linearization
  • design optimization
  • Spray
  • voltage
  • Supersonic
  • Path Planning
  • aerodynamic efficiency
  • Scramjet
  • Fault tolerant control
  • Mass Flow
  • interior ballistics
  • guidance law
  • Buckling
  • sensor
  • optimal design
  • Lagrangian points
  • Flexible Satellite
  • frequency response
  • experimental method
  • aerodynamic heating
  • optimal reliability modeling
  • angle of attack
  • OpenFOAM
  • Plasma Actuator
  • near-Earth asteroids
  • Classic controller
  • heat transfer rate
  • Stress transfer
  • third order shear deformation theory
  • power off
  • Cutout
  • Aerodynamic forces
  • hardware-based satellite simulator
  • RANS
  • spiral atomizer
  • structural design
  • passenger aircraft
  • UAM
  • MEMS inertial sensors
  • Aircraft Design
  • Stall
  • design parameters
  • Modified Stir casting method
  • Navier-Stokes equation
  • navigation system
  • Triple Jets
  • static coefficient
  • Vibration Control
  • Inverse kinematic problem
  • improvement
  • design structured matrix (DSM)
  • thrust vector
  • \"Telescopic Booms\"
  • Flying Targets
  • nonlinear observer
  • Nonlinear dynamic
  • mini-turbojet engine
  • Aero gas turbine engine
  • space security
  • functional guidance
  • impeller
  • diamond lattice
  • geometric secrecy
  • Carbon/epoxy composite
  • local damage model
  • time delay
  • Output power
  • free transverse vibration
  • linear regression
  • functionally graded viscoelastic materials
  • classical laminated plate theory
  • Multi-phase
  • carbon nanotubes (CNT)
  • Macromechanical modeling
  • Pressurized swirl injector
  • systematic design
  • Vibrational Analysis
  • Volume Dynamics
  • heat sink
  • numerical flow simulation
  • Wick
  • Bandwidth
  • \"
  • Decentralized Formation control \"
  • Probabilistic Neural Network
  • adhesively bonded joint
  • Electrical discharge machining
  • Integrated guidance and control
  • three dimensional elasticity
  • approximate and near optimal solution
  • Relative tracking