[1] S. Lee, D. Tanaka, J. Kusaka, Y. Daisho, Effects of diesel fuel characteristics on spray and combustion in a Diesel engine, JSAE Review, Vol. 23 pp. 407–414, 2002.
[2] F. Payri, V. Bermudez, R. Payri, F.J. Salvador, The influence of cavitation on the internal flow and the spray characteristics in diesel injection nozzles, J. of Fuel, Vol. 83, pp. 419–431, 2004.
[3] E. Delacourta, B. Desmet, B. Besson, Characterisation of very high pressure diesel sprays using digital imaging techniques, J. of Fuel, Vol. 84, pp. 859–867, 2005.
[4] I.V. Roisman, L. Araneo, C. Tropea, Effect of ambient pressure on penetration of a diesel spray, International Journal of Multiphase Flow, Vol. 33, pp. 904–920, 2007.
[5]O. A. Kuti, J. Zhu, K. Nishida, X. Wang, Z. Huang, Characterization of spray and combustion processes of biodiesel fuel injected by diesel engine common rail system, J. of Fuel, Vol. 104, pp. 838–846, 2013.
[6] Q. Dong, W. Long, T. Ishima, H. Kawashima, Spray characteristics of V-type intersecting hole nozzles for diesel engines, J. of Fuel, Vol. 104, pp. 500–507, 2013.
[7] F.J. Salvador, M. Carreres, D. Jaramillo, J. Martínez-López, Comparison of microsac and VCO diesel injector nozzles in terms of internal nozzle flow characteristics, J. of Energy Conversion and Management, Vol. 103, pp. 284–299, 2015.
[8] Y. Park, J. Hwang, C. Bae, K. Kim, J. Lee, S. Pyo, Effects of diesel fuel temperature on fuel flow and spray characteristics, J. of Fuel, Vol. 162, pp. 1–7, 2015.
[9] R. Payri, J. Gimeno, G. Bracho, D. Vaquerizo, Study of liquid and vapor phase behavior on Diesel sprays for heavy duty engine nozzles, J. of Applied Thermal Engineering, Vol. 107, pp. 365–378, 2016.
[10] K. M. Pang, M. Jangi, X.S. Bai, J. Schramm, J. H. Walther, Effects of Nozzle Diameter on Diesel Spray Flames: A numerical study using an Eulerian Stochastic Field Method, J. of Energy Procedia, Vol. 142, 1028–1033, 2017.
[11] Z. F.Zhou, G. Y. Lu, B. Chen, Numerical study on the spray and thermal characteristics of R404A flashing spray using OpenFOAM. Int. J. Heat Mass Transf, Vol. 117, pp. 1312–1321, 2018.
[12] E. G. Santos, J. Shi, M. Gavaises, C. Soteriou, M. Winterbourn, W. Bauer, Investigation of cavitation and air entrainment during pilot injection in realsize multi-hole diesel nozzles, J. of Fuel, Vol. 263, 116746, 2020.
[13] İ. Temizer, The combustion analysıs and wear effect of biodiesel fuel used in a diesel engine, , J. of Fuel, Vol. 270, 117571, 2020.
[14] E. Winklhofer, E. Kull and E. Kelz, Comprehensive hydraulic and flow field documentation in model throttle experiments under cavitation conditions, Proceedings of the ILASS-Europe conference, Zurich; pp. 574–9, 2001.
[15] A. Ghasemi, R.M. Barron, R. Balachandar, Spray-induced air motion in single and twin ultra-high injection diesel sprays, J. of Fuel, Vol. 121, pp. 284–297, 2014.