[1] Kashani, M. R., Aramid Short Fiber Reinforced Rubber as a Tire Tread Composite, Journal of applied polymer science, Vol. 113, No. 2, pp. 1355-1363, 2009.
[2] Gu, B., Chen, Y. and Zhou, J., Design, Manufacture and Performance Evaluation of Non-Asbestos Sealing Composites, in: Advances in Composite Materials-Ecodesign and Analysis, Eds.: InTech, Vol. 64, pp. 21-54, 2011.
[3] Dasheng, Z., Boqin, G. and Ye, C., Micromechanical Model of Stress Distribution and Transfer in Short-Fiber-Reinforced Elastomer Matrix Composite, Journal of Computational and Theoretical Nanoscience, Vol. 5, No. 8, pp. 1546-1550, 2008.
[4] Tian, M., Su, L., Cai, W., Yin, S., Chen, Q., Fong, H. and Zhang, L., Mechanical Properties and Reinforcement Mechanisms of Hydrogenated Acrylonitrile Butadiene Rubber Composites Containing Fibrillar Silicate Nanofibers and Short.
[5] Zhang, B., Gu, B. and Yu, X., Failure Behavior of Resorcinol–Formaldehyde Latex Coated Aramid Short Fiber Reinforced Rubber Sealing under Transverse Tension, Journal of Applied Polymer Science, Vol. 132, No. 12, 2015.
[6] Cox, H., The Elasticity and Strength of Paper and Other Fibrous Materials, British journal of applied physics, Vol. 3, No. 3, pp. 72-79, 1952.
[7] Halpin, J. C., Primer on Composite Materials Analysis, Lancaster (PA), Technomic, Vol. 130, 1984.
[8] Tandon, G. and Weng, G., The Effect of Aspect Ratio of Inclusions on the Elastic Properties of Unidirectionally Aligned Composites, Polymer composites, Vol. 5, No. 4, pp. 327-333, 1984.
[9] Eshelby, J. D., The Determination of the Elastic Field of an Ellipsoidal Inclusion, and Related Problems, Proc. R. Soc. Lond. A, Vol. 241, No. 1226, pp. 376-396, 1957.
[10] Mori, T. and Tanaka, K., Average Stress in Matrix and Average Elastic Energy of Materials with Misfitting Inclusions, Acta metallurgica, Vol. 21, No. 5, pp. 571-574, 1973.
[11] Lu, Y. and Liaw, P., Effects of Particle Orientation in Silicon Carbide Particulate Reinforced Aluminum Matrix Composite Extrusions on Ultrasonic Velocity Measurement, Journal of composite materials, Vol. 29, No. 8, pp. 1096-1116, 1995.
[12] Lawrence, P., Some Theoretical Considerations of Fibre Pull-out from an Elastic Matrix, Journal of Materials Science, Vol. 7, No. 1, pp. 1-6, 1972.
[13] Takaku, A. and Arridge, R., The Effect of Interfacial Radial and Shear Stress on Fibre Pull-out in Composite Materials, Journal of Physics D: Applied Physics, Vol. 6, No. 17, pp. 2038-2047, 1973.
[14] Luk, V. and Keer, L., Stress Analysis for an Elastic Half Space Containing an Axially-Loaded Rigid Cylindrical Rod, International Journal of Solids and Structures, Vol. 15, No. 10, pp. 805-827, 1979.
[15] Hsueh, C. H., Analytical Evaluation of Interfacial Shear Strength for Fiber Reinforced Ceramic Composites, Journal of the American Ceramic Society, Vol. 71, No. 6, pp. 490-493, 1988.
[16] Hsueh, C.-H., Interfacial Debonding and Fiber Pull-out Stresses of Fiber-Reinforced Composites, Materials Science and Engineering: A, Vol. 123, No. 1, pp. 1-11, 1990.
[17] Hsueh, C.-H., Interfacial Debonding and Fiber Pull-out Stresses of Fiber-Reinforced Composites Vii: Improved Analyses for Bonded Interfaces, Materials Science and Engineering: A, Vol. 154, No. 2, pp. 125-132, 1992.
[18] Hsueh, C.-H., Young's Modulus of Unidirectional Discontinuous-Fibre Composites, Composites Science and Technology, Vol. 60, No. 14, pp. 2671-2680, 2000.
[19] Gao, X.-L. and Li, K., A Shear-Lag Model for Carbon Nanotube-Reinforced Polymer Composites, International Journal of Solids and Structures, Vol. 42, No. 5-6, pp. 1649-1667, 2005.
[20] Safarabadi, M., More Accurate Evaluation of Curing Residual Stress Field Considering Interphase Characteristics, Journal of Science and Technology of Composites, Vol. 1, No. 1, pp. 3-12, 2014. (In Persian)
[21] Esbati, A. H. and Irani, S., Multiscale Modeling of Fracture in Polymer Nanocomposite Reinforced by Intact and Functionalized Cnts, Journal of Science and Technology of Composites, Vol. 4, No. 1, pp. 35-46, 2017. (In Persian)
[22] Zakeri, M., Shayanmehr, M. and Shokrieh, M. M., Interface Modeling of Nanotube Reinforced Nanocomposites by Using Multi-Scale Modeling Method, Modares Mechanical Engineering, Vol. 12, No. 5, pp. 1-11, 2012. (In Persian)
[23] Sina Alemi Parvin, Asghar Mohammadpour Fattahi, Numerical prediction of elastic properties of carbon nanotube reinforced composites using multi-scale method, Aerosapce Knowledge and Technology Journal, Vol. 7, No. 1, pp. 117-128, 2018. (In Persian)
[24] Meini, Y., Yanqing, Y., Bin, H. and Yaojin, W., Effect of Interface Reaction on Interface Shear Strength of Sic Fiber Reinforced Titanium Matrix Composites, Rare Metal Materials and Engineering, Vol. 38, No. 8, pp. 1321-1324, 2009.
[25] Zhang, W., Li, L. and Wang, T., Interphase Effect on the Strengthening Behavior of Particle-Reinforced Metal Matrix Composites, Computational Materials Science, Vol. 41, No. 2, pp. 145-155, 2007.
[26] Mondali, M. and Yousefi, M. R, Prediction a Range for Elastic Modulus of Cnt Reinforced Polymer Composites Using Analytical Method, Modares Mechanical Engineering, Vol. 14, No. 7, pp. 52-60, 2014. (In Persian)
[27] Shokrieh, M. M., Soveity, S. and Mosalmani, R., An Investigation on Effects of Aspect Ratio of Representative Volume Element on Elastic Modulus of a Carbon Nanotubes Reinforced Polymer, Modares Mechanical Engineering, Vol. 14, No. 9, pp. 107-116, 2014. (In Persian)
[28] Abedian, A., Mondali, M. and Pahlavanpour, M., Basic Modifications in 3d Micromechanical Modeling of Short Fiber Composites with Bonded and Debonded Fiber End, Computational Materials Science, Vol. 40, No. 3, pp. 421-433, 2007.
[29] Mondali, M. and Abedian, A., An Analytical Model for Stress Analysis of Short Fiber Composites in Power Law Creep Matrix, International Journal of Non-Linear Mechanics, Vol. 57, pp. 39-49, 2013.
[30] Timoshenko, S. and Goodier, J., Theory of Elasticity, third ed., New York: McGraw-Hill Book Co., Inc., 1970.
[31] Taheri Behrooz, F., Mahdavizade, S. M. and Gholami, M. J., Micromechanics of Stress Transfer through the Interphase in Pull out Test of Fiber through the Resin, Journal of Science and Technology of Composites, Vol. 4, No. 3, pp. 283-294, 2017. (In Persian)
[32] Yin Yao, Shaohua Chen, Peijian Chen, The effect of a graded interphase on the mechanism of stress transfer in a fiber-reinforced composite, Mechanics of Materials, Vol. 58, pp. 35-54, 2013.
[33] Rahnama, H. and Shokrieh, M. M., Exact Micromechanical Stress Analysis of Long Fiber Composites under Uniform Tensile Loading, Journal of Science and Technology of Composites, Vol. 2, No. 3, pp. 1-10, 2015. (In Persian)
[34] Papanicolaou, G., Anifantis, N., Keppas, L. and Kosmidou, T. V., Stress Analysis of Short Fiber-Reinforced Polymers Incorporating a Hybrid Interphase Region, Composite Interfaces, Vol. 14, No. 2, pp. 131-152, 2007.
[35] Shen, L. and Li, J., Effective Elastic Moduli of Composites Reinforced by Particle or Fiber with an Inhomogeneous Interphase, International Journal of Solids and Structures, Vol. 40, No. 6, pp. 1393-1409, 2003.
[36] Yu, X., Gu, B. and Zhang, B., Effects of Short Fiber Tip Geometry and Inhomogeneous Interphase on the Stress Distribution of Rubber Matrix Sealing Composites, Journal of Applied Polymer Science, Vol. 132, No. 16, pp. 1-8, 2015.
[37] Coffey, A., O’Bradaigh, C. and Young, R., Interfacial Stress Transfer in an Aramid Reinforced Thermoplastic Elastomer, Journal of materials science, Vol. 42, No. 19, pp. 8053-8061, 2007.